(2) rockville apm6w 6.5″ powered studio monitors+active 10″ subwoofer+

$297.95

(2) rockville apm6w 6.5″ powered studio monitors+active 10″ subwoofer+

SKU: 302715229829 Category:

Description

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Package: Pair of Rockville APM6W 6.5″ 2-Way 350 Watt Powered Studio Monitors + Rockville APM10W 10″ 400 Watt Active Studio Subwoofer + Rockville RCDSTR10B 10′ Nickel-Plated 1/4″ TRS to Dual 1/4″ TS Cable + Pair of Rockville RRS190S High Density Foam Studio Monitor Isolation Pads –> Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR AUDIOSAVINGS Product Description Package Includes: (1) Pair of Rockville APM6W 6.5″ 2-Way 350W Active/Powered USB Studio Monitors (1) Rockville APM10W 10″ 400 Watt Powered/Active Studio Subwoofer (1) Rockville RCDSTR10B 10′ 1/4″ TRS to Dual 1/4″ TS Y-Cable (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads Authorized Rockville Dealer! Video of APM6W: Unboxing video of APM6W: The Rockville APM6 Active Studio Monitor Comes in Pairs and each monitor will be bi-amped. What this means is that there is a separate amp for the highs and a Separate amp for the lows! Each speaker has 175 watts peak output power and 67.5 watts RMS giving you a total of 350 watts peak and 175 watts RMS per pair. We spent a lot of time developing the most premium studio monitors we ever built! I am very pleased and excited to talk to you guys about what we did to make these speakers sound as good as they do. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections. Description of the enclosure: We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particleboard material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio. Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but also elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The rear port is built to perfect spec to enhance the sound. The tweeter has a curved front bezel to make the highs crystal clear and distortion free. Amplifier and Speaker Components Details: To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high-end manufacturers like us use these components. For highs, we have Ferro fluid enhanced 1.5″ neodymium silk dome tweeters with metal grill protection. If you are an audiophile I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without worrying about melting and blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person. We use a 6.5” woofer. This will out-perform a regular 6” or 5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids. Basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies so that the speaker can go loud without distorting. We use very high-grade crossover filters in our speakers. The specially wounded voice coils produce accurate response along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded! Added benefits: The rear-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality! Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your speaker can handle more power! Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker! Inputs and Outputs and Rear Panel Controls: As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The volume control, bass, and treble controls are all found on the rear of the unit. These Monitors have all your standard studio inputs and outputs such as a ” and XLR combo input jack, RCA input, 3.5MM headphone output. We also added a USB port. The reason we did this is because instead of having to use the 3.5MM or 1/4″ TRS jack, you can now directly select the speakers as an output on your computer without using an interface! And you will get true stereo sound! Features: Rockville APM6W 6.5″ 2-Way 350 Watt Powered USB Studio Monitor Speakers in White (Pair) RMS: 175 Watt Two-Way Active Studio Monitor Speaker System Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers Enclosure is made of top quality MDF wood. Our enclosure is not particleboard, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers! Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room The enclosure is built with the perfect amount of air space to maximize sound quality for a studio The port is built to the perfect spec to enhance the sound Full Range Class “D” Amplifier Circuitry with Auto-Switching Power Supply LED Power on Indicator on Rear Panel Ferro Fluid Enhanced 1.5″ Neodymium Silk Dome Tweeter With Metal Grill Protection Tweeter has 1” voice coil diameter Curved Front Bezel Design Eliminates Standing Wave Distortion Injection Molded Polypropylene Cone Woofer Rubber woofer surrounds increases sound quality and eliminates unwanted distortions Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality! We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded! Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clearly, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer! World-class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brands that make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components 110/220 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltages more efficiently and adheres to all international efficiency standards! Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!) Transducer Production Line to Make the SPL Performance Stable One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise). We also use a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish Inputs / Outputs / Controls: Volume control Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently) ” and XLR combo input jack High Speed USB jack RCA input 3.5mm Headphone output Details: Certification: CE and RoHS Compliant Amplifier: Class D, very efficient amplifier with top components! (ADI–ADAU1701, TI–TPA3116, SMPS) System Impedance: Tweeter 6 Ω : Woofer 4 Ω Signal to noise ratio: 90dB (Maximum output with THD+1<1%, A-weight) Max SPL: 102dB @ 1w/1m THD: 0.10% Frequency Response: 50Hz – 20 kHz 350 Watts peak output per pair 175 Watt RMS output per pair Each speaker produces 175 watts peak and 87.5 watts RMS Input voltage: 120V Components: 1" neodymium silk dome tweeter and 6.5" woofer with rubber surrounds and polypropylene cone Product Dimensions in Inches (Single): (W*H*D): 8.5” inch x 12.6” inch x 10” inch Shipping Dimensions in Inches (For pair boxed): (W*H*D): 25.35” x 16.38” x 12.2” inch Net Weight (Pair): 22 LBS Shipping Weight (Pair): 26 LBS Includes speaker linking cable and power plug Input Impedance (Ohms): 10K Ohm Balanced System Volume: (-30dB to +6dB) Owner’s Manual About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one-year warranty, though it is unlikely that you will need to use it. Video of APM10W: Unboxing Video for APM10W: Authorized Rockville Dealer! The Rockville APM10 is an Active Studio Subwoofer that delivers unbelievable sounding bass! These subs put out an amazing 400 watts peak power and 200 watts RMS power. We spent a lot of time developing the most premium studio subwoofer we’ve built to date! I am very pleased and excited to talk to you guys about what we did to make this subwoofer sound as good as it does. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections. Description of the enclosure: We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.7” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio. Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these subwoofers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The front-firing port is built to perfect spec to enhance the sound. Amplifier and Speaker Components Details: To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use STA309 for audio processing and STA516 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. STA is the name of the makers of these IC’s. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high-end manufacturers like us use these components. We use a 10” woofer that will outperform all 10” woofers in this price range! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The specially wound voice coils produce accurate response along for deep, rich lows. We developed the woofer with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded! Added benefits: The front-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality! Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on subwoofers is of the upmost importance. If the glue does not hold up, the subwoofer will be done and blow. We use the latest machinery to manufacture these subwoofers. The SPL of the subwoofer goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your subwoofer can handle more power! Thick “Wadding” protects the inside of the subwoofer cabinet. This can be seen if the subwoofer cabinet is removed. Basically, wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the subwoofer. This material is also a fire retardant. This is unique to our subwoofers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best subwoofer! Inputs and Outputs and Rear Panel Control: As I mentioned earlier, we kept all the controls on the rear of the unit to make this subwoofer look clean and modern. The volume control, crossover frequency control, phase control, and treble control are all found on the rear of the unit. These subwoofers have all have standard RCA input/outputs. Features: Rockville APM10W 10" 400 Watt Active Studio Subwoofer in White 200 Watt RMS Built-in Class D Amplifier Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF! The enclosure is 0.7” thick while the front board of it is a full 1.34” thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers! Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room The enclosure is built with the perfect amount of air space to maximize sound quality for a studio The front-firing port is built to the perfect spec to enhance the sound Class “D” Amplifier Circuitry with Auto-Switching Power Supply LED Power on/Stand-by Indicator on Rear Panel Rubber woofer surrounds increases sound quality and eliminates unwanted distortions Computer Optimized Electronic Crossover Network filters out Highs and Mids. Front-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality! We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded! Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on woofers is of the upmost importance. If the glue does not hold up, the woofer is done. We use the latest machinery to manufacture these woofers. The SPL of the woofer goes up when you use better glue and a better machine the secure the glue in place Thick “Wadding” protects inside the subwoofer cabinet – Wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons. It helps to make the sound come out more clearly, and it also protects all the parts inside the subwoofer. This material is also a fire retardant. This is unique to our subwoofers. Most other brands do not take this step due to the cost of the material, but it is a game changer! World-class top of the line audiophile grade components! We use STA309 for audio processing and STA516 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ST is the name of the makers of these IC’s. Most people do not know brands who make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components Every subwoofer in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long, long time!) Transducer Production Line to Make the SPL Performance Stable Shiny metal mesh grill Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish Inputs / Outputs / Controls: Volume control Crossover Frequency Control allows you to adjust low frequency input: 50Hz – 150Hz ” TRS input jack Left and Right XLR input/outputs RCA input/outputs Details: Certification: CE and RoHS Compliant Amplifier: Class D, very efficient amplifier with top components! (ST–STA309, ST–STA516, SMPS) Woofer Impedance: 8 Ohm Signal to noise ratio: 98 dB (Maximum output with THD+1<1%, A-weight) THD: 0.8% Frequency Response: 34Hz – 150 KHz 400 Watts peak output 200 Watt RMS output Input voltage: 120V 10" woofer with rubber surround and paper cone with painted Product Dimensions in Inches: (W*H*D): 13.4'' x 14.5'' x 15.7'' Shipping Dimensions in Inches: (W*H*D)17.3 ''x 19.3'' x 19.7 ''' Net Weight: 28.7 LBS Shipping Weight: 34.1 LBS Input Impedance (Ohms): 10 K Ohm Balanced System Volume: (-30dB to +6dB) Owner’s Manual About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville Products are backed with a full one year warranty, though it is unlikely that you will need to use it. Video of RCDSTR10B: Authorized Rockville Dealer Authorized Rockville Dealer! Description: All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum).CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer. The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Features: Rockville RCDSTR10B Nickel-Plated 1/4" TRS to Dual Mono 1/4" TS Cable Perfect for connecting a channel insert on a mixer to an effects processor Perfect to connect a keyboard to a mixer Perfect to connect an in ear monitor system to a mixer Nickel-Plated Plugs for Rugged Durability and Efficient Signal Transfer 100% Copper Conductors for Enhanced Signal Clarity OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility Length: 10 Ft Color: Black About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty. Video of RRS190S: Authorized Rockville Dealer! Description: The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors. Isolate your speakers! Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops. How to get maximum performance from your Monitors! Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”. Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best. Rockville Studio Isolation Pads Feature: Easiest and affordable way to improve your studio monitors sound Decouples your studio monitors from desktops and monitor stands for accurate reproduction Each package contains 2 Isolation Pads – enough for 2 studio monitors 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees Supports up to 100 lbs., so they can isolate a variety of studio gear Handsome charcoal gray color Decouple your monitors for super-accurate sound What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system. Perfectly position your monitors Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning. The most affordable way to improve the sound of your studio monitors Features: Rockville RRS190S: Monitor Isolation Pads 3 Angle High Density Foam 7.5" x 9.5" High quality, High Density Foam Eliminates vibrations and unwanted noises in your studio Price is for (2) pads which accommodates (2) speakers About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR Defective items: If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning an item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: APM6W+APM10W+RCDSTR10B+RCDR10B+RRS190S Home / About Us / Contact Us / Returns / FAQ's Copyright 2016 Audio Savings, All rights reserved. | Template Design

Brand: Rockville

MPN: APM6W+APM10W+RCDSTR10B+RCDR10B+RRS190S

UPC: 613816009428

Type: Studio Monitor

Model: APM6W+APM10W+RCDSTR10B+RCDR10B+RRS190S

Active/Passive: Active

Features: 2-Way Configuration,Full Range Configuration,Input Gain Control,USB Interface

RMS Power: 175W

Bundle Listing: Yes

Country/Region of Manufacture: China